Speede V.2

SpeeDe V.1 -pdf

upgraded features ;

– 12 v battery

– improved LDR sensitivity

changes made ;

– 12 v battery

On Speede v.1 we used 2x 9v batteries, one for driving the arduino board and another for powering the laser. This did not suit the device as it kept on draining up the batteries. Which made us upgraded the battery source to a 12 v rechargeable battery, but the laser and the arduino kit could only handle 9v supply. This made us connect an IC 7809 from the battery source and then supply the components ( ic 7809 simply burns the excess voltage i.e.3 v and provides a supply of 9v as an output)

DSC_0490 DSC_0443 DSC_0444

– improved LDR sensitivity

The LDR’s sensing the laser were affected by external light sources, this compromised Speede’s ability to work in a brighter environment. In order to eliminate this factor, two pvc tubes were fitted around each LDR.

DSC_0447 DSC_0450