(formerly Aura Auro Design) – LEARN, GROW, WORK, TEACH
The following video demonstrates on how to create a spice model of a component, from a .subckt file which can be acquired from the retailer. following is a spice model file for a bridge rectifier ; mb6s data sheet : MB6S_MCC –...
Read out allThe following circuit has a voltage source that operates between 3V and 5V and is connected to the Op Amp’s positive input, across a resistor divider R2 and R1 at the node Va. The simulation is run for 200m secs. The design...
Read out allSTEM Land: STEM Land is a place for ‘Learning’ which we are creating in Udavi school. The vision behind the STEM is learning based on Concepts, practical observation & abstraction. In short “Mediocrity to Excellence“. It has large variety of materials (...
Read out allLTspice IV is a high performance SPICE simulator, schematic capture and waveform viewer with enhancements and models. The simulator software can be downloaded from the following link: ltspice.linear-tech.com/software/LTspiceIV.exe The following is a circuit on how to use a switch ” .model ”...
Read out allI was doing shapes( squares, rectangles and triangle) with 4th and 5th grade children. Then I thought of introducing areas also to them. Doing areas with formulas would be a little difficult for them as they are not yet fully comfortable with...
Read out allThreadTest: Lets loot at a sample program for better understanding of threads. It was written in python extension C( calling C function from python). This is an example for parallel processing. So I made a program to print string ( some words...
Read out allThe Deek robot is similar to the Arduino pro mini with a ATmega 328. it has no USB interface. i used the Arduino UNO to program the Deek robot, without removing the micro controller ATmega 328 from the UNO board. 1. Connect...
Read out allThe frequency and the sine wave was set by the function generator. The input, output wave forms were observed from the CRO. The conditions taken were a 50KΩ , 1KΩ and a current source. The input was fed to the 2.1...
Read out allWe wanted to use the transistor as an amplifier. The input voltage at the base was 3v. Two resistors, one at the emiiter(R1) and the other at the collector(aR1) were connected. 9v supply was given at R1. Constraints : We wanted head...
Read out all